Concrete Swimming Pool Standard Inclusions*
Prices are inclusive of:
- Pool water depth 1.0m at the shallow end to 1.8m at the deep end (to middle of the skimmer box line, average of 1.4m)
- 6m of combined step, swim out or seat
- Step and tread tiles fitted to the edge of all steps, seats and swim outs
- One row of 200mm x 200mm or 100mm x 200mm ceramic waterline tiles to the value of up to $50.00 including GST per m2. Note: mosaic tiles not included.
- One single row of standard reconstituted limestone bullnose headers (270mm x 400mm x 40mm) to an allowance of $20 a lineal metre with mortar joints in between header course
- One Poolrite underwater light with a blue coloured lens ONLY
- One skimmer box and three return to pool inlets
- A Hurlcon high rate sand or cartridge filter with a Hurlcon pump:
- Pools with a volume < 40,000 litres are supplied with the Hurlcon ZX100 cartridge filter and the Hurlcon E230 pump
- Pools with a volume between 40,000 litres and 55,000 litres are supplied with the Hurlcon E650 sand filter and the E230 pump
- Pools with a volume > 55,000 litres are supplied with the Hurlcon E750 sand filter and the Hurlcon E290 pump
- A vacuum accessory pool cleaning kit
- White cement internal plaster finish (known as Marblesheen or white plaster)
- Electrical connection to the filtration system and light (to a maximum of 40 metre cable run including 2 double GPO’s)
*Perth metropolitan installations only
Concrete Pools
Aqua Technics has been building concrete pools for over 20 years and is one of the largest concrete swimming pool companies in Western Australia. Our concrete division operates under a Quality Management System which complies with ISO 9001 for the management of the construction of quality concrete pools. This is your reassurance that you are dealing with a company with proven success and the service to back it up.